Hypertherm

Cutting Machines
Specifications
Process Equipment
Options


Home

Repair Service

Used Equipment

Warranty

Contact

Location

Company Information

Employment
Cutting Capacities logo - ALLtra Corporation




Cutting Widths

The Tables below show the Shape Cutting Gantry model sizes available.  The cutting width represents the base machine with one process station on the main carriage.  Adding additional torch stations/carriages will decrease the maximum single cut width capacity by the width of each station added.


Model  G-14

Table 1-1:  Single Torch Cutting Capacity on Dry Grid Tables
Model Cutting Width ft.(m) Maximum Table Width ft.-in. (m)
G14-8 8 (2.44) 8'-8" (2.64)
     G14-10      10 (3.05) 10'-8" (3.25)
G14-12 12 (3.66) 12'-8" (3.86)
G14-14 14 (4.27) 14'-8" (4.47)



Model  G-30

Table 2-1:  Single Torch Cutting Capacity on Flat Tables
Model Maximum Table Width ft.
     G30-28      30
G30-26 28
G30-24 26
G30-22 24
G30-20 22
G30-18 20
G30-16 18
G30-14 16
G30-12 14
G30-10 12




When sizing a water-filled table, use the following table to insure cut capacity with all torches cutting.  Table 1-2 shows the absolute maximum cut available with 1/2" clearance at each table wall.  If the machine is equipped with multiple torches on separate carriages, but is making a cut while some torches are idle, a wider cut may be obtained by either parking the unused carriage at the end of the beam or by raising the idle torch above the height of the water table side.  The maximum width of cut for multiple torches may approach by not exceed the Single Torch cut capacity.


Model  G-14

Table 1-2:  Multiple Torch Cutting Widths for Standard Water Table Sizes
Table Width Maximum Cut Capacity ft.-in. (m)
 8'-8" (2.64)    10'-8" (3.25)    12'-8" (3.86)    14'-8" (4.47)  
Single Torch 7'-7" (2.34) 9'-7" (2.94) 11'-7" (3.56) 13'-7" (4.17)
Two Torches 6'-11" (2.13) 8'-11" (2.74) 10'-11" (3.35) 12'-11" (3.96)
Three Torches 6'-5" (1.98) 8'-5" (2.59) 10'-5" (3.20) 12'-5" (3.81)
Four Torches 5'-7" (1.73) 7'-7" (2.34) 9'-7" (2.95) 11'-7" (3.56)
Five Torches 5'-1" (1.57) 7'-1" (2.18) 9'-1" (2.79) 11'-1" (3.40)
Six Torches 4'-7" (1.42) 6'-7" (2.03) 8'-7" (2.64) 10'-7" (3.25)
Dual Process 6'-1" (1.85) 8'-1" (2.46) 10'-1" (3.07) 12'-1" (3.68)
Triple Process 5'-3" (1.60) 7'-3" (2.21) 9'-3" (2.81) 11'-3" (3.42)






Cutting Lengths


The cutting length is determined by the length of rail.  Standard rail cutting lengths are listed in Tables 1-3 and 2-3.  Rail sets come complete with leveling pads, end stops, rack and a hardware kit.


Model  G-14

Rail available in standard lengths
of 14'-4" (4.34 m) and 7'-2" (2.17 m)

Table 1-3:  Standard Rail Lengths and Their Associated Cut Lengths
   Rail Length      Cutting Length  
14'-4" 7'-8" (2.34m)  
21'-6" 14'-10" (4.52m)  
28'-8" 22'-0" (6.71m)  
35'-10" 29'-2" (8.89m)  
43'-0" 36'-4" (11.1m)  
50'-2" 43'-6" (13.3m)  
57'-4" 50'-8" (15.4m)  
64'-6" 57'-10" (17.6m)  
71'-8" 65'-0" (19.8m)  
78'-10" 72'-2" (22.0m)  
86'-0" 79'-4" (24.2m)  
93'-2" 86'-6" (26.4m)  
100'-4" 93'-8" (28.6m)  
Model  G-30

Rail available in standard lengths
of 12' and 6'

Table 2-3:  Standard Rail Lengths and Their Associated Cut Lengths
   Rail Length     Cutting Length 
12' 2'-11"  
18' 8'-11"  
24' 14'-11"  
30' 20'-11"  
36' 26'-11"  
42' 32'-11"  
48' 38'-11"  
54' 44'-11"  
60' 50'-11"  
66' 56'-11"  
72' 62'-11"  
78' 68'-11"  
84' 74'-11"  





ALLtra Corporation
1600 Patridge Rd.      P.O. Box 370     Dewey, Oklahoma 74029
Phone:  918-534-5100      FAX:  918-534-5101
email:  alltra@alltracorp.com
Send email